Blackberry Bold 9000 Repair Guide

Step 1: Make sure you have all the proper tools needed first.

Step 2:  The back of your Blackberry Bold is the battery door that needs to be removed first.

Step 3:  Push the battery door lock to release battery cover.

Step 4:  Take out the battery and remove the six Torx T4 screws around the edges of your Blackberry Bold.

Step 5:  Use the plastic opening tool to pry up the black plastic frame as shown in image.

Step 6: Lift up the frame and set it aside.

Step 7:  Use the plastic opening tool to pry up the Blackberry Bold logic board and release it from the frontplate.

The usb port and headphone jack will keep the logic board from coming loose from the front plate. Carefully move the logic board left and right as you try to pull it upward.

Step 8:  Release the logic board from the front plate and set it aside.

Step 9: These are  the components you have disassembled so far.

Step 10: Carefully slide the plastic opening tool under the screen and pry the Blackberry Bold Screen loose from the logic board.

Step 11:  Slide the tool over the other side of the screen. Work with patience to avoid bending the screen. 

When releasing the small screen connector on the other side of the board, be sure to keep flex cable from tearing. Be sure to work slowly, the paperthin material tears easily. 

Step 12: Pry up the metal casing holding the blackberry bold trackball in place.

Step 13:  Flip the metal casing upward to expose the trackball and lift the Trackball out of the enclosure and set it aside. 

Step 14:  The last step is to remove the keypad from the front plate.  Pry under the keypad to release from the frontplate.

Now that you have  fully disassembled your Blackberry Bold its time to customize it!!! Check out http://www.fonlogix.com for everything you need and more to repair, replace, and customize your Blackberry Bold :]

Advertisements

3 Responses to “Blackberry Bold 9000 Repair Guide”

  1. Robert Nissenbaum Says:

    Informative, but you should mention that there are multiple display versions AND that ESD precautions should be taken.

  2. samar Says:

    hi please help me opening the blackberry bold chipset, i had been facing problem past couple of days, my bold is dead and gives the error message display as ERROR CODE PRESS RESET.when i press reset it shows as no applicaton, i thought its software problem, but the technitian says it radio IC problem, i know want to change the IC please advice

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: